Tools
Check price or
place an order
|
| Magnesium Bull Float for stamped concrete Sizes: 1220х200 mm. Weight: 4,54 kg. Application: It is intended for smoothing down of concrete after laying and a finish of a color layer (fixer) on big surfaces.
|
| Steel concrete fresno trowel Sizes: 920х130 mm. Weight: 2,49 kg. Application: It is intended for finishing burnishing of a color layer on big surfaces.
|
| Rotatable Bracket for big smoothing hammers Sizes: 150х290х130 mm. Weight:2.72 kg Description: The bracket is fastened on big smoothing hammers. It is made of strong and light aluminum. It is intended for turn of blades of smoothing hammers by means of the handle. Allows to turn the smoothing hammer under the necessary corner at concrete smoothing down.
|
| The handle big for Float Sizes: length - 1820 mm, diameter - 45 mm. Weight: 0,91 kg Description:The telescopic handle made of strong and light aluminum.
|
| Mahogany float with wood handle Sizes: 455х85 mm. Weight: 0,45 kg. Description: The smoothing hammer is made of strong mahogany. It is intended for smoothing down of concrete after laying and a finish of a color layer (fixer) on small squares and in hard-to-reach spots (an adjunction to a wall, a ladder, about columns, etc.).
|
![]() | Finishing small trowel Размеры: 455х100 мм. Вес: 0,68 кг. Description:The smoothing hammer is made of blue steel. It is intended for smoothing down of concrete after laying and a finish of a color layer (fixer) on small squares and in hard-to-reach spots (an adjunction to a wall, a ladder, about columns, etc.).
|
| Hand edger Sizes: 150х150 mm. Weight: 0,45 kg Description:The smoothing hammer is made of stainless steel with the wooden handle. It is intended for creation of the radius of 12 mm on edge of concrete plates that prevents chips of edges of stamped concrete in use and gives accurate appearance.
|
![]() | Rustic masonry thin (lacing) Sizes: 280х70х10 mm. Weight: 0,23 kg Description: It is intended for extrusion of seams or completion of seams directly after patterning. Permanent thickness - 10 mm.
|
![]() | Rustic masonry thick Sizes: 270х80х20 mm. Weight: 0,14 kg Description:It is intended for extrusion of seams or completion of seams directly after patterning. Variable thickness is from 4 to 20 mm. |