Sealers for concrete and stone
Check price or place an order
The varnish is intended for protection against penetration of moisture, wall efflorescence, burning out, wear of decorative plaster, brick, natural and artificial stone. For giving of a surface of saturated color and effect of "a wet stone".
The sealers represents mix of copolymeric acrylic resins in mix of organic solvents. Possesses penetrative action. After drying forms a transparent film, improves decorative properties of a surface (gloss, color saturation).
Method of application
The basis should be dry, is cleared of dust, dirt, fats. Oils, remaining balance of old coverings. The varnish is applied on a surface with a brush or the roller in 1-2 layers with an interval not less than 1 hour.
Consumption – 0,15-0,25 l on 1 sq.m of a surface depending on a type, brands, material density. At the high absorbing capability of the basis to put a varnish in two layers.
Visual appearance – homogeneous transparent liquid
Mass fraction of nonvolatile substances, on weight – 0%
Density – 0,9 g/cm3
Drying time to degree 3 – no more than 60 minutes
Packing –canister 5, 10 l.
Material is stored 12 months from the moment of production in a leak-proof package. Protect from naked flame.
During the work with a varnish it is necessary to avoid contacts with skin and eyes. Protect airways with a respirator and other means of individual protection.